WET FILTRATION
Fluid Bed Dryer filter Bag
Fluid bed dryers are usually used at the end of process cycles, close to the end of the process cycle, optimizing the particle capture and flow rates are key.
- We use the highest quality Conductive (Anti-Static) and non-conductive fabrics available to ensure our bag will exceed expectations
- Since these bags are complex to stitch, precision cutting through stringent quality control is key
- Our fabrics are lint-free and fully inspected.
- Our bags are sewn using our exclusive "lock-stitch" which eliminates seam separation during the stress of processing
- Customized to fit all OEMs FBD/FBP.
Centrifuge Filter Bags
Centrifuge bags are utilized extensively by pharmaceuticals, chemicals, and drug manufacturers. As centrifuges are typically used in acidic environments, polypropylene is widely used for top lifting, top discharge, and bottom discharge centrifuge bags.
Centrifugal energy is used so that the wall of the centrifuge is the media and permits the filtrate to go through while leaving the solids on the surface. These solids can be put to wash and then detached continuously by an unloading knife and discharged out from the particular means.
Our centrifuge bags are custom-stitched to your specifications and provide you and optimal balance between production and quality.
A complete solution
To provide customized filter bags, we begin with an assessment of the process to understand particle retention and flow rate requirements to suggest the right fabric to be used in terms of the weave and yarn (spun/ mono or multi-filament yarns)
Sparkler Pads
Creative Techno Solutions provides disposable as well as re-usable Sparkler filter pads from woven and non-woven fabrics.
- The materials include Polypropylene, Cotton, Nylon, and Polyester
- In some cases, specialty fabrics are also used
- These are used extensively in the pharmaceutical and chemical industries on sparkler filter presses
- All our sparkler filter pads are heat sealed or have reinforced edges to provide longer life.
- Wide range of media choice ensures high chemical compatibility and high resistance to the type of slurry.
Polish Filter
We offer Welded Top and Welded Seams or Sewn filter bags for Liquid filtration. Impenetrable welded seams improve filtration and in conjunction with a glazed finish on the filter bag, greatly reduces or eliminate fiber migration. For certain applications, Welded seams offer an advantage over sewn seams.
The bottom, side, and Flange top of the Welded Seam Filter Bags for Liquid Filtration is completely welded. No thread is used, and no sewing holes exist.
Although our standard Welded Seam filter bags are made with glazed media, plain media in many of the above micron ratings can often be provided.
With a wide range of micron sizes, we can support and partner with many industries like chemical, food, paper, petroleum, adhesives, paints, water treatment, beverages, pharmaceuticals and more !
Sizes & Media
SIZES: Standard Welded Seam filter bags are available in:
- 7” x 16”
- 7” x 32”
- 4” x 10”
- 4” x 20”
- 7” x 36”
Media: Standard Welded Seam filter bags are available with:
- Glazed Polypropylene felt media in 1, 3, 5, 10, 25, 50, 75, 100, and 200 microns
- Glazed Polyester felt media in 1, 3, 5, 10, 25, 50, 75, and 100 microns
- Nylon Filter media bags are also available
Uses in Water Filtration - Effluent Treatment and Incoming Water Filtration
- Incoming Water Filtration is required in water-intensive processing plants such as dyeing, pharmaceuticals, and other industries.
- Effluent Treatment Water must be filtered before discharge across all water-intensive process plants.
Rotary Vacuum Drum Filter
The rotary drum vacuum filters, a workhorse of the chemical process industry for many years, has been designed for long life and easy maintenance.
- Our wide range of woven and non-woven media allows you to balance throughput, cake discharge, and long-life.
- High particle retention, bursting and tearing strength, and abrasion resistance of the fabric besides chemical and thermal compatibility are important. Besides, abrasion resistance is required as the process of removal of the dried cake involves scraping.
- Our quality Filter Cloth withstands the rigorous scraping process used to remove the dried cake.
- We often recommend a double-layered fabric to ensure the longevity of the filter cloth and better separation. Hence, we also offer a knitted nylon backing fabric that can be used underneath the top cloth to provide a cushion and stability for the cloth as it moves through the Rotary Drum process
- Innovative agitator rake design ensures solids remain in suspension and avoids
sediment in the system tank for better materials distribution - Wide range of choices for drum material to suit process demand– polypropylene, carbon steel (unlined or rubber-lined), stainless steel, as well as other materials